Delivery date: 40 days after deposit
Guarantee: one year
General features:
Model:ABA-1400
Maximum film width: 1200mm
Output capacity: around 80kg/h Note: output depends on film width/thickness etc
Power supply: 380V three phase; 50Hz
Raw Material: LDPE/LLDPE
Dimension (
L×W×H): 4000mm×4000mm×6500mm
Weight: About 4000kg
Extruder unit:
Screw diameter: 55mm/55mm
Main motor power: 22KW/22KW
Gearbox: 173#, with oil pump
Screw L/D ratio of screw: 30:1
Speed of screw: 5-100rpm
Barrel cooling: 1/6 Hp cooling blower
Film thickness: 0.01-0.15mm
Material of screw and barrel: Alloyed high-quality steel 38CrMoAlA with optimum hardness and strong corrosion resistance after precision finishing and nitrogen treatment
Heaters: stainless heaters
Heating capacity: 30kw
Rotary inflation head
Inflation Die: 300mm
Cooling air blower: 5.5kw controlled by inverter
Air ring: double lips air ring
Automatic hopper loader: 2pcs
Take up unit
Film bubble taking up motor: 1.5kw
Steel roller/rubber roller length: 1400mm
Guiding roller: 2pcs
Wooden plank bubble supports and A-frame with Gusset device
Tower's height adjusted by motor-rise and fall type
Film taking off speed: 5-70m/min
Ladder and walking board width: 60cm
Double winding station
Winding type: by fraction
Winding motor: 15N/M torque motor x 3SETS
Torque motor controlled by speed adjuster, easy for operation
Friction metal/rubber roller: 220mm diameter*1400mm (L)
Banana roller: 2pcs
Maximum winding diameter: 600mm
Side slitting blade at the two sides
Center slitting knife to cut the film into smaller film stripe: 3pcs
Waste film collecting system
Air shaft: 4pcs
Control Panel
1. Temperature of barrel and die head controlled by digital temperature controller
2. Inverter controls main motor/taking up motor/air blower
3. Electronics used are all Chinese top brand
4. Current meters and Voltage meters show the working state of motors
5). Small fan installed to avoid high temperature caused by long time running
Audited Supplier 
){kind=link}
){kind=link}