ABA Film Blowing Machine 800mm film Width Extrusion Blow Moulding Blowing Machine

• Customization: Available
• Warranty: 1 Year
• Screw Diameter: 45mm*2PCS
• Model NO.: ABA-900
• Certification: CE
• Condition: New
• Ld Ratio: 30:1
• Output: 60kgs/H
• Automatic: No
• Blow Moulding Type: Extrusion Blow Moulding
• Blower: 2.2kw
• Power(W): 18.5kwx2
• Gearbox: 146
• Film: Wenzhou Ruian ABA Film Blowing Machine
• Transport Package: Plastic Film, , Wooden Boxes, or as Required
• Trademark: songshan
• Origin: Zhejiang, China (Mainland)

Product Description

ABA Film Blowing Machine 800mm Flim Width Extrusion blow moulding  Blowing Machine

Wenzhou Ruian Songshan ABA PE FILM BLOWING MACHINE

ABA Three Layers Co-extrusion Film Blowing Machine adopts special co-extrusion A+B+A film blowing die and has unique features in the production of HDPE, LDPE and LLDPE material. The physical strength of the film is enhanced through multiple-layers. The three-layer co-extrusion machine only needs two hosts: one is for the inner layer and the outer layer (A layer) and the other is for the interlayer (B layer)

 

Model	ABA-900	ABA-1200	ABA-1400
main material	HDPE
film width	800mm	1000mm	1200mm
output	60kgs/H	75kgs/H	100kgs/H
screw diameter	45mm×2pcs	50mm×2pcs	55mm×2pcs
gearbox	146	146	173
motor capacity	15KW	18.5KW	22KW
die size	60mm	80mm	100mm
air blower	2.2KW	3KW	5.5KW
roller width	900mm	1200mm	1400mm
taking up speed	0-60m/min
winding type	fraction type single winder
winding diameter	650mm
Dimension	4×3×4.5M	4×3.5×6M	4.5×4×7M

 

Because of its low cost, it is widely used in the production of films. It can blow 3 kinds of polyethylene film including low pressure, high pressure and linear low density film. Meanwhile, It can blow films with new materials as well as reworked plastics with stable performance and reliable quality. This type machine applies a extruder with a special screw structure; advanced screw die head, flexible cooling wind ring, and reasonable fixed iris structure can ensure a good proportion of 3 mixed polyethylene materials.

Reworked materials or other affordable materials like 50% calcium carbonate can be used without affecting the strength, weldability, printing properties of the products; and the cooling becomes faster and the yield is higher because of the calcium carbonate or low pressure polyethylene in the interlayer.