Delivery date: 40 days after deposit
Guarantee: one year
General features:
Model: ABA-900
Maximum film width: 800mm
Output capacity: around 60kg/h Note: output depends on film width/thickness etc
Power supply: 380V three phase; 50Hz
Raw Material: HDPE/LDPE/LLDPE
Dimension (
L×W×H): 4000mm×4000mm×5000mm
Weight: About 3500kg
Extruder unit:
Main motor power: 18.5KW/18.5KW
Screw diameter: 45mm/45mm
Screw L/D ratio of screw: 30:1
Speed of screw: 5-100rpm
Barrel cooling: 1/6 Hp cooling blower
Film thickness: 0.01-0.15mm
Material of screw and barrel: Alloyed high-quality steel 38CrMoAlA with optimum hardness and strong corrosion resistance after precision finishing and nitrogen treatment
Heaters: stainless heaters
Heating capacity: 30kw
Fixed inflation head
Inflation Die: 80mm for HDPE; 160mm for LDPE
Cooling air blower: 3kw controlled by inverter
Air ring: double lips air ring
Take up unit
Film bubble taking up motor: 1.5kw
Steel roller/rubber roller length: 900mm
Guiding roller: 2pcs
Wooden plank bubble supports and A-frame with Gusset device
Tower's height adjusted by motor-rise and fall type
Film taking off speed: 5-70m/min
Ladder and walking board width: 60cm
Single winding station
Winding type: by fraction
Winding motor: 15N/M torque
Torque motor controlled by speed adjuster, easy for operation
Friction metal/rubber roller: 250mm diameter×900mm (L)
Maximum winding diameter: 600mm
Shaft for film roll changing: 2pcs
Control Panel
1. Temperature of barrel and die head controlled by digital temperature controller
2. Inverter controls main motor/taking up motor/air blower
3. Electronics used are all Chinese top brand
4. Current meters and Voltage meters show the working state of motors
5). Small fan installed to avoid high temperature caused by long time running
Audited Supplier 
){kind=link}