Customerized High Output 1200mm film Width Extrusion Blow Moulding Machine for Plastic Bags

• Warranty: One Year Guarantee
• Screw Diameter: 55mm*2PCS
• Certification: Ce ISO SGS
• Film: Wenzhou Ruian ABA Blown Film Extruder
• Condition: New
• Ld Ratio: 30:1
• Model NO.: ABA-1400
• Motor: 22kw
• Output: 100kgs/H
• Automatic: No
• Blow Moulding Type: Extrusion Blow Moulding
• Blower: 5.5kw
• Power(W): 25kwx2
• Transport Package: Plastic Film, , Wooden Boxes, , or as Required
• Trademark: songshan
• Origin: Zhejiang, China (Mainland)

Product Description

Customerized high output 1200mm flim width extrusion blow moulding machine for plastic bags

Wenzhou Ruian Songshan ABA PE FILM BLOWING MACHINE

ABA Three Layers Co-extrusion Film Blowing Machine adopts special co-extrusion A+B+A film blowing die and has unique features in the production of HDPE, LDPE and LLDPE material. The physical strength of the film is enhanced through multiple-layers. The application of one host machine to supply materials for inner and outer layers which can reduce the configuration of the other host, to cut cost, save energy and lower consumption.

The Film blowing machine is used to blow the plastic films like LDPE (low density polyethylene), HDPE (high density polyethylene) and LLDPE (linear low density polyethylene) into bubble film. Its products are widely used to pack fruit, food, clothes, textile, like garbage bags and vest/T-shirt bags, shopping bags and daily necessities and other industrial products.

Model	ABA-900	ABA-1200	ABA-1400
main material	HDPE
film width	800mm	1000mm	1200mm
output	60kgs/H	75kgs/H	100kgs/H
screw diameter	45mm×2pcs	50mm×2pcs	55mm×2pcs
gearbox	146	146	173
motor capacity	15KW	18.5KW	22KW
die size	60mm	80mm	100mm
air blower	2.2KW	3KW	5.5KW
roller width	900mm	1200mm	1400mm
taking up speed	0-60m/min
winding type	fraction type single winder
winding diameter	650mm
Dimension	4×3×4.5M	4×3.5×6M	4.5×4×7M

 

Low pressure polyethylene (HDPE) and linear low density polyethylene (LLDPE) are new varieties of polyethylene in the international market. It has advantages of impact strength, penetration-resistance, environmental stress crack resistance, and low temperature resistance, especially it can be used to make micro-thin films (the film strength of 0.015 mm film is as much as that of 0.03mm high-pressure polyethylene film).

Reworked materials or other affordable materials like 50% calcium carbonate can be used without affecting the strength, weldability, printing properties of the products; and the cooling becomes faster and the yield is higher because of the calcium carbonate or low pressure polyethylene in the interlayer.

 

 

 

FAQ AND CONTACT US